A1 DTF Printer (600 mm)
600 mm direct-to-film production for T-shirt and garment shops
An A1 DTF printer runs 600 mm film, which fits two A4 transfer panels side by side. The catalogue lists single- and dual-head A1 machines with XP600 or i3200 heads, priced per configuration and quoted with the finishing equipment you need.
What 600 mm film covers
A 600 mm film path carries two A4 panels per pass, so a shop can gang left-chest logos, full-front designs and sleeve prints on one run. That width is the production size for garment decorators moving from DTG or screen printing into transfer work.
A3 (300 mm) remains the better fit for sampling and very low volume. A1 becomes economical when the daily mix includes full-front prints and the press and shaker can absorb the output.
- Print width: 600 mm (A1)
- Heads: single or dual XP600, or i3200 configurations
- Film: 600 mm DTF film, powder and heat press workflow
- Parts: XP600/i3200 heads, capping stations and boards listed separately
A1 configurations in the catalogue
Listed examples include the SC680+S 600 mm (A1) DTF Printer with dual XP600 heads at US$2,711–2,759, the 600 mm (A1) DTF Printer with i3200 at US$2,711–2,759, and the 600 mm (A1) DTF Printer with XP600 at US$3,336–3,360.
Head count and head model are the main variables. A dual-head machine is the largest standard DTF configuration in the store; four-head lines are quoted on request rather than listed as catalogue SKUs.
Finishing and support
A DTF line needs a powder shaker and a heat press matched to the film width. The printer listing covers the machine configuration; ask for the shaker, press and consumable lines to be itemised on the same quote.
Spare XP600 and i3200 printheads, capping stations, dampers and HOSON mainboard/conversion kits are listed as separate part SKUs, with a 3–5 working day parts lead time.
Products

SC680+S 600 mm (A1) DTF Printer · Dual heads · XP600
- Machine typeDTF Printer
- Print width600 mm (A1)
- Printhead configurationDual heads · XP600

600 mm (A1) DTF Printer · i3200
- Machine typeDTF Printer
- Print width600 mm (A1)
- Printhead configurationi3200

600 mm (A1) DTF Printer · XP600
- Machine typeDTF Printer
- Print width600 mm (A1)
- Printhead configurationXP600
FAQ
What is the difference between an A1 and A3 DTF printer?
A1 uses 600 mm film and fits two A4 panels per pass; A3 uses 300 mm film. A1 is the production width for T-shirt shops, while A3 suits sampling rooms and low-volume work.
How much does an A1 DTF printer cost?
Listed A1 configurations run from US$2,711–2,759, for the dual XP600 and i3200 examples, and US$3,336–3,360, for the XP600 listing. Final pricing depends on head choice, finishing equipment and destination.
Do I need a powder shaker with an A1 printer?
Yes. DTF film needs hot-melt powder applied and cured before transfer. Specify the shaker width with the printer so the film path and curing section match.
Not sure which machine?
Tell us what you print and how much per day. We will recommend a width, head count and printhead — and tell you where the next size up stops paying for itself.
Talk to Technical Sales
