DTF Hot Stamping Machine (DTF Transfer)
The store's 'hot stamping' category is DTF film transfer, not foil stamping
In this store, 'DTF hot stamping' is the category name for direct-to-film garment printers. These are A1/A3 heat-transfer printers that print onto PET film, powder and cure it, then press the transfer onto fabric. They are not metallic foil hot-stamping presses.
What the category contains
The category holds 19 DTF printers in 300 mm (A3) and 600 mm (A1) widths, with single or dual XP600/i3200 heads. The workflow is print, powder, cure and press — the same DTF process used for T-shirts, hoodies and caps.
Listed examples include the SC680+S 300 mm (A3) DTF Printer with dual i3200 heads at US$4,680–4,799, the SC680+S DTF Printer with dual XP600 heads at US$3,466–3,599, and the SC680+S 600 mm (A1) DTF Printer with dual XP600 heads at US$2,711–2,759.
- Category: DTF hot stamping (DTF garment printers)
- Widths: 300 mm (A3) and 600 mm (A1)
- Heads: XP600 or i3200, single or dual
- Finishing: powder shaker and heat press
Why the category is named 'hot stamping'
In this category, the name refers to the heat-transfer step: the printed film is pressed onto the garment with heat and pressure. In DTF, the transfer carries a full-colour print plus a hot-melt adhesive layer, not a metallic foil.
This is different from foil hot stamping, which bonds a metallic layer to the surface. The catalogue does not list a foil hot-stamping press; if that is your requirement, state it in the inquiry so it is not confused with a DTF machine.
What to specify
State the film width, head model and count, daily transfer volume, fabric mix and whether you need a shaker and press on the same order. Those four lines decide the build and the finishing configuration.
For a DTF line, ask for the printer, shaker, press, film and powder to be itemised. The machine listing does not by itself confirm the finishing bundle.
Products
300 mm (A3) DTF Printer · i3200
- Machine typeDTF Printer
- Print width300 mm (A3)
- Printhead configurationi3200

SC680+S 300 mm (A3) DTF Printer · Dual heads · i3200
- Machine typeDTF Printer
- Print width300 mm (A3)
- Printhead configurationDual heads · i3200

SC680+S DTF Printer · Dual heads · XP600
- Machine typeDTF Printer
- Printhead configurationDual heads · XP600
FAQ
Is this a foil hot-stamping machine?
No. The category name refers to DTF heat transfer. These are direct-to-film printers used with film, hot-melt powder and a heat press, not metallic foil presses.
What widths and heads are listed?
300 mm (A3) and 600 mm (A1) machines with single or dual XP600/i3200 heads. Dual head is the largest standard configuration; four-head is quoted on request.
What else is needed to run one?
A powder shaker, heat press, DTF film, hot-melt powder and ink. Match the shaker and press to the film width and ask for them to be itemised on the quote.
How much does a DTF hot stamping machine cost?
Listed DTF machines run from US$2,711–2,759, for the A1 dual XP600 SC680+S to US$4,680–4,799, for the A3 dual i3200. Entry listings with tiered ranges need a quote.
Not sure which machine?
Tell us what you print and how much per day. We will recommend a width, head count and printhead — and tell you where the next size up stops paying for itself.
Talk to Technical Sales
