DTF Printhead Replacement

Symptoms, tools and the steps that avoid a second failure

Printheads decide print quality and downtime. Most failures show up as missing nozzles, banding or a head that will not fire after cleaning. Replacing the head is a field job if the capping station and ink path are healthy.

When to replace instead of clean

Start with a nozzle check and a capping-station inspection. If missing nozzles persist after cleaning and the capping station is sealing correctly, the head is the likely cause. Repeated cleaning on a failing head wastes ink and can damage the board.

  • Persistent missing nozzles after cleaning
  • Banding that does not move with alignment
  • Head that stops firing after a long idle
  • Ink leaking from the nozzle plate

Replacement steps

Power down, release the head lock, disconnect the damper lines and remove the head. Fit the new head, reconnect the lines, prime gently and run a nozzle check. Then align the head in the RIP and print a test transfer before production.

Keep the damper and capping station clean during the swap. A worn cap or a contaminated damper can make a new head fail in the same way as the old one.

Spare heads in the catalogue

XP600 and i3200 printheads are listed as separate part SKUs with a 3–5 working day parts lead time. The I3200 printhead listing runs US$300–1,320; XP600 printhead listings start at US$300, with the exact variant and quantity determining the quote.

Send the machine model, a photo of the current head and the board revision. Compatibility is checked before dispatch; a head that does not match the board wastes a week.

Products

FAQ

How much does a DTF printhead cost?

The I3200 printhead listing runs US$300–1,320; XP600 printhead listings start at US$300. The exact price depends on variant and quantity, so request a quote for the head that matches your machine.

Can I replace a printhead without a technician?

Yes on these machines, if you follow the replacement guide and take care with the damper lines and head lock. We provide remote support for priming and alignment.

How do I know which head fits my printer?

The machine model, head configuration and board revision determine compatibility. Send a photo of the current head and the board revision before ordering.

How long do spare heads take to ship?

The parts lead time is 3–5 working days. Freight is quoted to your address.

Not sure which machine?

Tell us what you print and how much per day. We will recommend a width, head count and printhead — and tell you where the next size up stops paying for itself.

Talk to Technical Sales
Inquiry
Email
amy@iseekprinter.com
WeChatWeChat
WeChat QR code
+86 15899974755
WhatsAppWhatsApp
WhatsApp QR code
+86 15899974755