Dual-Head DTF Printer
Two printheads for production throughput without a second machine
A dual-head DTF printer runs two printheads across the same film path. It is the largest standard DTF configuration in the catalogue and the usual production choice when one head cannot keep the press and shaker fed.
What dual heads change
Two heads print the colour and white layers faster, shortening the queue before powdering and pressing. On dense full-front designs, the pair also keeps line speed steadier than a single head.
The trade-off is calibration and maintenance: two heads must be aligned and capped together, and a head failure removes half the output until it is replaced.
- Head options: dual XP600 or dual i3200
- Widths: 300 mm (A3) and 600 mm (A1) film paths
- Throughput: higher than a single-head machine on the same width
- Maintenance: alignment, capping and head cost scale with head count
Listed dual-head machines
The catalogue lists the SC680+S 300 mm (A3) DTF Printer with dual i3200 heads at US$4,680–4,799, the SC680+S DTF Printer with dual XP600 heads at US$3,466–3,599, and the SC680+S 600 mm (A1) DTF Printer with dual XP600 heads at US$2,711–2,759.
The SC680+S dual XP600 listing does not state a width in its name; confirm the film width of the quoted build before ordering.
When dual head is the ceiling
Dual head is the largest standard configuration in the store. Four-head lines are quoted on request, not listed as stock machines, and only make sense when the shaker and press can absorb the extra output.
If the finishing line is already the bottleneck, a second dual-head machine or a wider film path may be more useful than a four-head build.
Products

SC680+S 300 mm (A3) DTF Printer · Dual heads · i3200
- Machine typeDTF Printer
- Print width300 mm (A3)
- Printhead configurationDual heads · i3200

SC680+S DTF Printer · Dual heads · XP600
- Machine typeDTF Printer
- Printhead configurationDual heads · XP600

SC680+S 600 mm (A1) DTF Printer · Dual heads · XP600
- Machine typeDTF Printer
- Print width600 mm (A1)
- Printhead configurationDual heads · XP600
FAQ
How much faster is a dual-head DTF printer?
It is roughly double the output of a single-head machine on the same film width, depending on design coverage and resolution. The gain is largest on dense full-front prints.
Should I choose XP600 or i3200 dual heads?
XP600 is the lower-cost purchase and replacement option. i3200 suits continuous production where speed and head life matter more than replacement cost. Both are listed in A3 and A1 builds.
Is a four-head DTF printer available?
Four-head lines are quoted on request. The catalogue's standard DTF machines are single- and dual-head; the product grid above shows the dual-head configurations.
What else is needed with a dual-head printer?
A powder shaker and heat press matched to the film width, plus film, powder and ink. Ask for finishing and consumables to be itemised with the machine quote.
Not sure which machine?
Tell us what you print and how much per day. We will recommend a width, head count and printhead — and tell you where the next size up stops paying for itself.
Talk to Technical Sales
