XP600 DTF Printer
The lower-cost Epson head option for A1 and A3 DTF machines
XP600 is an Epson printhead used in the catalogue's entry and mid-range DTF machines. It costs less to buy and replace than i3200, which makes it the practical choice for sampling rooms, intermittent production and shops adding a second machine.
Why XP600 is the common choice
The head is widely supported, replacements are cheaper than i3200, and print quality is sufficient for garment decoration at normal viewing distance. For A3 sampling machines and A1 production machines, XP600 keeps the entry cost lower.
A dual XP600 machine adds throughput without moving to the higher i3200 head cost. The trade-off is speed and service life under continuous daily production.
- Widths: 300 mm (A3) and 600 mm (A1)
- Configurations: single or dual XP600
- Heads and capping stations listed as separate part SKUs
- Parts lead time: 3–5 working days
Listed XP600 machines
The catalogue lists the SC680+S DTF Printer with dual XP600 heads at US$3,466–3,599, the SC680+S 600 mm (A1) DTF Printer with dual XP600 heads at US$2,711–2,759, and the 600 mm (A1) DTF Printer with XP600 at US$3,336–3,360.
Confirm the film width on the SC680+S dual XP600 listing before ordering; the product name does not state 300 mm or 600 mm.
When XP600 is not enough
If the machine runs continuously, or buyers inspect fine detail at close range, i3200 heads hold up better over long shifts. The higher purchase price is offset by speed and service life.
We quote both head options on the same width so the comparison covers the same film path and finishing line.
Products

SC680+S DTF Printer · Dual heads · XP600
- Machine typeDTF Printer
- Printhead configurationDual heads · XP600

SC680+S 600 mm (A1) DTF Printer · Dual heads · XP600
- Machine typeDTF Printer
- Print width600 mm (A1)
- Printhead configurationDual heads · XP600

600 mm (A1) DTF Printer · XP600
- Machine typeDTF Printer
- Print width600 mm (A1)
- Printhead configurationXP600
FAQ
How long does an XP600 printhead last in a DTF printer?
Service life depends on ink quality, daily capping, humidity and how often the machine runs. Keeping the capping station clean and printing regularly extends head life more than any single setting.
Can I replace an XP600 head myself?
It is a field-replaceable part on these machines. The catalogue lists XP600 printheads as separate SKUs; we provide a replacement guide and remote support for priming and alignment.
How much does an XP600 DTF printer cost?
Listed dual XP600 machines run US$2,711–2,759, for the A1 SC680+S and US$3,466–3,599, for the SC680+S listing. The single XP600 A1 listing is US$3,336–3,360. Request a quote for the exact build.
Can I upgrade an XP600 machine to i3200 later?
The printhead, board and firmware are matched at build time. Upgrading later is not a drop-in swap; it is usually cheaper to choose the head configuration when the machine is ordered.
Not sure which machine?
Tell us what you print and how much per day. We will recommend a width, head count and printhead — and tell you where the next size up stops paying for itself.
Talk to Technical Sales
